Abus WIRELESS ALARM SYSTEM Instrucciones de operaciones descargar pdf (Pagina 30)

Operating switch outputs:

For further details on operating switch outputs, see the installation instructions. There

are two kinds of switch outputs. They behave differently when they are switched:

– Permanent output: Remains active until deactivated.

– Pulsed output Remains active for a predefined period and is then automatically

deactivated.

Changing Follow Me (FM) numbers:

Only the Grand Master, Master and Manager authorisation levels are permitted to

change FM numbers.

For details about FM numbers, see section 6.2.

4.2.1 Remote listen

With the ABUS wireless alarm system, you can listen in to the system by telephone –

for example, to find out the cause of an event. You can also speak to your house over

the loudspeakers of the ABUS wireless alarm system. However, in contrast to normal

telephone calls, you cannot simultaneously hear and speak.

IMPORTANT:

After selecting one of the two options (listen in or speak), you have two minutes for

listening in or speaking. You are then returned to the operation menu.

1. You are in the operation menu. Press [6] on your telephone. You hear the

following message: “To listen in press 1, to talk press 2.”

2. To listen in: [6][1]

Press [1] to listen in to your system. The internal siren of the ABUS wireless

alarm system is off. If you speak now, you voice cannot be heard over the

loudspeaker of the ABUS wireless alarm system. However, you can hear

what is happening.

3. To speak: [6][2]

Press [2] to speak to your system. The internal siren of the ABUS wireless

alarm system is silenced and your voice can be heard over the loudspeaker.

IMPORTANT:

When you switch from listening in to speaking, a beep sounds. While you are in

speaking mode, the MESSAGE LED flashes.

4. To cancel the remote listen function:

Press [*] to end listening in and speaking and return to the operation menu.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 55 56

Sin comentarios

Abus WIRELESS ALARM SYSTEM Instrucciones de operaciones Pagina 30