Abus PT Series Guía de usuario descargar pdf (Pagina 33)

English



Entering system information

1. Enter a name for your system at “System Name” which should

then be displayed on your mobile phone.

2. Now enter the 15 digit DID number. You can find the DID at the

rear of the monitor and in the Network Information (see page 27).

This you can find in your monitor's network information on the

label stuck on the product or click on “Search” and all the devices

in the near vicinity are displayed.

3. Then enter your password.

The password is the security code which you can also find in your

monitor's network information.

If you have not changed your password on the monitor, this will be

the default password: 123456.

4. Save the settings with “Save” and “Yes”.

Once you change your password in the monitor, you also have to

change it here; otherwise you will not be able to access the

cameras.



Connection status

If you have added you system successfully, the name of your system

and the current connection status appear.

Click on the screen to go to the live view.

System name

e.g. System 1

Connection status

Connected = you are connected with your system

Disconnected = there is no connection to the system

Adding the system

Here you can add an additional system

System configuration

Go to the system configuration here.

Press to go to the live view again.

Updating the connection

The connection is updated.

Firmware information / PIN code

Here you can see the current firmware version of

the system and save a PIN code. You can find out

how to enter a PIN code at .

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 150 151

Sin comentarios

Abus PT Series Guía de usuario Pagina 33