Abus FU9001 Especificaciones descargar pdf (Pagina 35)

7-35

7.2.6

Tamper Sound

In the Tamper Sound menu, you can define the sounds generated by the ABUS wireless alarm system following a tamper in a zone,

the ABUS wireless alarm centre housing, the wireless operating panel, or any other device. You can also adjust the sounder volume

for alarms and their acknowledgement.

To access the Tamper Sound menu:

1. Select the System menu as described on page 7-23.

2. In the System menu, press

to access the menu option of the Tamper Sound menu. You see the

following on the display:

3. Select and configure the settings in the Tamper Sound menu as follows:

Tamper Sound:

Quick-Key Parameter Default Range

Tamper sound Bell/A Buzzer/D

1 to 5

Programs the signals generated by a tamper alarm.

Setting

ound

Silent

Bell only (external sounder)

Buzzer only (piezo on operating panel)

Bell and buzzer

Bell/Arm, Buzzer/Disarm

NOTE:

If you set sounder/active and buzzer/inactive, the system will activate only the buzzer when

in deactivated state. If the system is active, the external sounder is also activated.

Speaker Volume

djusts the volume of the integrated sounder in the event of an alarm and for

acknowledgement.

Alarm 5

0 to 5

If you confirm this menu option, the sounder is activated briefly at the volume defined.

You can adjust the volume with buttons 0 to 5.

The setting 0 deactivates the sounder, and 5 is the loudest setting.

Squawk 5

0 to 5

If you confirm this menu option, the sounder is activated briefly at the volume defined.

You can adjust the volume with buttons 0 to 5.

The setting 0 deactivates the sounder, and 5 is the loudest setting.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 100 101

Sin comentarios

Abus FU9001 Especificaciones Pagina 35